BML SPYDR 600 Heat v 3 x 3 Tent

PetFlora

Well-Known Member
When I first received the 600 I did not use an actual tent

Years ago, I built a wood frame for my 8 bulb Quantum Bad Boy (2 x 4) over which I draped either windshield reflectors, and later insulated foam board, but the top above is open

Upon installing the 600, I quickly noticed that the backside of the SPYDR spine was HOT

I solved that by positioning a 12" fan up high horizontally, so that ~ half blew across the bars with the other half blowing across the canopy

This grow I decided to put the 600 in its' own tent and grow one Big Mexican female. I found Milliard tents on Amazon; the 4 x 4 is only $125 + free shipping.

Accidentally, I ordered a 3 x 3 tent, which I just erected yesterday. The tent meets my needs and will order the 4 x 4 (actually 50" x 50") I will use the 3 x 3 for the 265w new comer panel, but in the mean time, I decided to test the 600 in it

1. damn a lot more light, which should add many more grams to harvest
2. it is hot in there

The tent has 3 vent windows at the bottom, which I found to be a waste in my 2 x 4 tent, so I reversed the skin, putting it upside down, which puts the 3 vents at the top :hump:

Not enough room inside the 3 x 3 for the fan, so one door flap is open with the fan blowing in and up

Temp is very comfy now


I think minimum of 4 x 4, with 5 x 5 even better to hold the fan, etc

Pic is of Blueberry Cheese Cake which I harvested

For grins, I decided to see if I could revive her, and had her in my 2 x 4 tent under a ~ 70w 3500K ufo for 3 weeks.

In the last 6 days new leafs are sprouting.

This morning I moved it under the 600 until such time as new seedlings are ready
 

Attachments

Last edited:

GroErr

Well-Known Member
Hey Pet, nice, subbed, interested to see a full run with that BML. A couple of grows out I'm thinking of replacing my cheap/chinese SMD based LED Tubes with some of those BML bars, maybe some UV bars as well to supplement my DIY COB's. What's the actual pull from that 600? What will you end up running in there and is your plan to fill the full 3x3'?
 

PetFlora

Well-Known Member
Hey Pet, nice, subbed, interested to see a full run with that BML. A couple of grows out I'm thinking of replacing my cheap/chinese SMD based LED Tubes with some of those BML bars, maybe some UV bars as well to supplement my DIY COB's. What's the actual pull from that 600? What will you end up running in there and is your plan to fill the full 3x3'?

Yeah, I'm stoked, especially now that I see how much light was being lost :wall:

I did a grow with 4 @ ~ 20w SMD tubes, which are now serving nicely as indirect lighting in other rooms in the house

Actual is ~ 366w, though that has little meaning.

Umoles/m^/sec is the criteria we are concerned with

See BMLs pdf for graphs

I am planning on growing 2 more Big Mex females (people love it) and run one under the 600 and another under a new comer's 260w panel. He's a grower, and swears his 260 puts out better umoles than the 600.

Can't wait to test it
:hump:
 

GroErr

Well-Known Member
Interested to see this 260w you've been teasing us about lately ;) I've certainly seen that raw wattage has nothing to do with anything other than cost to operate, this CMH I'm running pulls a total of 386w but is blowing away my Chinese LED's of similar pull. I was more interested in the pull to see how it fares against a 3x3 or 3.5x3.5 under my CMH next round (only about 3 weeks out now), both are pulling essentially the same amount of power.
 

ficklejester

Well-Known Member
Do the bmls not have heat sinks? Or fans? It seems like a tight fit in there!

What's with the plant? You chopped and are regrowing it?
 

PetFlora

Well-Known Member
Nice growth already.
I don't know what you plan is, but it would be worth cloning it once it's ready/big enough so that you can start with a fresh root mass.
No real plan. But that's a good idea. She's Blueberry Cheesecake

Potent, but as one guy said, he can work on it, whereas the Big Mex (Silver Skunk, the other half of the back cross) makes his face melt, which he likes, as do several others after a hard day's work.

I pollinated her with Big Mex male and got a bunch of seeds, then abandoned her outside after harvest, but left her in tact in the bucket.

She was still alive after ~ a week (we had lots of rain), so I decided to see whether I could resurrect her under the SPYDR

Will be starting new seeds in ~ 2 weeks hoping for 2 Big Mex females.

Once I need the space I will either move her into my seedling tent, or move her outside
 

Yodaweed

Well-Known Member
nice I love to see a reveg, how long did it take to show signs of life and did you change the light cycle to 18/6 or ?
 

hyroot

Well-Known Member
good luck. both my reveg's died. I tried to do it outside though. I think it was way too hot for them to handle.
 

PetFlora

Well-Known Member
I restarted with ~ 14 hours light. Now up to ~ 16

It took a while, as I accidentally had the air pump off for thee first 5 days

Yes, it is the same light I flowered with

Fickle, you really wouldn't need to read very far on the BML site to get the answers
 

ficklejester

Well-Known Member
With a name like Build My LED, I wish they'd offer more customization- specific spectrums, no lens option. Would love to see them with COBs. Again, good luck with the grow!
 
Top